I printed this riser https://makerworld.com/en/models/128764#profileId-139490 for my P1S and I wanted to use the ultimate Panda Touch dock V 2.0.

The Panda Touch din't really fit into the opening. I had to come up with a solution because i coudn't find anything. I created a spacer so the Panda Touch dock isn't so close to the printer.

I made 2 versions. 1 is 8mm and the other is 12mm. In my case the 8mm was enought but with a different riser you might need the 12mm Version.

Plate 1 in the printprofile is 8mm spacer and plate 2 is the 12 mm spacer

I hope you find it iusefull. Happy printing.