EN: The toothpaste squeezer you see in the photo is printed in SUNLU PETG.
You will need to print three components: a body, a rod, and a gear wheel.
To assemble it, insert the rod into the body and screw the gear wheel onto the rod, as shown in the GIF.
Insert your toothpaste through the slot in the body and rod, and now you can turn the rod to squeeze the toothpaste out.
When you've used up all the toothpaste, turn the gear wheel to release the rod and extract the remaining toothpaste.
As you may have guessed, you can use it not only for bathroom products but for anything like creams or sauces.
When leaving your review, attach a photo!
IT: Lo spremi dentifricio che vedi in foto è stampato in PETG.
Dovrai stampare tre componenti: un corpo, un'asta e una ruota dentata.
Per montarlo inserisci l’asta nel corpo e avvita la ruota dentata all’asta, come nella GIF.
Inserisci il tuo dentifricio attraverso la fessura del corpo e dell’asta, ora potrai girare l’asta per spremere il dentifricio.
Quando avrai utilizzato tutto il dentifricio, gira la ruota dentata in modo tale da liberare l'asta ed estrarre il dentifricio.
Come avrai intuito puoi utilizzarlo non solo per i prodotti da bagno ma per qualsiasi cosa come creme o salse.
Quando lascerai la tua recensione allega una foto!