"THE TROOPER ACADEMY EDUCATION" – THE FRAME - COVER

I would like to present you my first cover with HueForge.

"THE TROOPER ACADEMY EDUCATION"

Since HueForge "only" consists of one image and I didn't want to make any guide rails under the image, as everything is to be printed without supports, there are 2 printing plates.

One is the image, and the other is the guide rail with a small plate.

You have to glue both parts together. i used second glue for this and it works great.

Maybe it is also the first phone stand with exchangeable covers and with Hueforge pictures.

Use the colours as you like, you will see it in your slicer.

I am looking forward to your results

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Orange Transmission Distance: 10

PLA BambuLab Matte Mandarin Orange Transmission Distance: 3

PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Orange

At layer #12 (1.04mm) swap to Mandarin Orange

At layer #18 (1.52mm) swap to Ivory White for the rest

Here you will only find the cover

You can find the matching stand here

https://makerworld.com/en/models/404540#profileId-306310

Have fun with it

If you like my work/project consider supporting me with these options:

• leave a like
• leave a comment
• download the file
• or buy me a Coffee

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

Have fun printing

TBG