To assemble this box you will need:
4pcs 608 bearings
2pcs - M8 threaded rods 164 mm long
6pcs - M3 bolt 30mm long.
The 2pcs screws are used as the rear hinges of the box and the other 4pcs screws are used to mount the closing clips.
2pcs - Pneufit Connector PC4-M10
Thread G1/8
Suitable for 2/4mm diameter bovden
Used in Ender printers
A box lid without holes has been added. Designed only for storage of filament in the box. Cannot be used for direct printing from the box.
The box allows you to insert a label from the outside with a description of the materials inserted. (Material type, manufacturer, printing temperatures and other necessary information. The space for inserting the label is really big, so you won't miss any necessary information.