Fidget Toy - Click Wheel by CUBEIFY

CUBEIFY

Toys & Games>Other Toys & Games

Print Profile(7)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill

Designer

40 min

1 plate

4.7(54)

0.2mm layer, 3 walls, 15% infill AMS

Designer

42 min

1 plate

4.8(24)

Mini - 70% - 0.2mm layer, 3 walls, 10% infill

24 min

1 plate

4.6(10)

A1 mini, 0.2mm layer, 3 walls, 15% infill

41 min

1 plate

4.3(4)

Click to see more

Boost

284

503

112

994

764

Released

Description

Fidget Toy - Click Wheel

The first of a series of fidget cubes i plan to make, mainly to come up with interesting mechanisms.

The Cog rests agains the spring which has a nice satisfying click and resistance.

Scale the spring up or down if you have an issue with it being too tight or loose.

Remove the spring for a free wheeling cog.

Simple print and assembly, everything is push fit without the need for glue.

Fidget Series:

Enjoy!

Comment & Rating (112)

@RJDesign

Print Profile

0.2mm layer, 3 walls, 10% infill

Prints well (a1 mini with eSun filament) but it only clicks for 20 mins or so before freely rotating. Flipped the components to get a bit longer but before long it's just spinning again

The designer has replied

@CUBEIFY

It shouldn't wear that quickly my original test model is still going, I would advise looking at calibrating the flow rate from those pictures

@DIGGY

Print Profile

0.2mm layer, 3 walls, 10% infill

This showed up when printing for some reason. I just cut it off and it worked fine

@zackza

hm looks like a pinball mechanism

@cfactor

Print Profile

Mini - 70% - 0.2mm layer, 3 walls, 10% infill

Simple but fun fidget. Works great. Thank you!

@Albatros

Nice, smooth print.

@Bazzlington

Print Profile

0.2mm layer, 3 walls, 15% infill AMS

Easy to print and well designed fidget toy.

@tdulny

Print Profile

Mini - 70% - 0.2mm layer, 3 walls, 10% infill

good but little problems with assembly

@GCdesign3D

Print Profile

0.2mm layer, 3 walls, 15% infill AMS

nice model but in my case it works only without the "spring"

@user_257658727

Print Profile

0.2mm layer, 3 walls, 10% infill

good

(Edited)

The designer has replied

@CUBEIFY

Scale up the piece called spring, it should push against the case when the wheel is installed

@user_257658727

k thanks

@zackza

Replying to @CUBEIFY :

can u post one profile with just a scaled up spring ? maybe two sizes up?

@jnb_printz

Print Profile

0.2mm layer, 3 walls, 15% infill AMS

@NotLiamSmith

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.