Llave de centro de transformación eléctrico / Electric transformation center key

This key is used to open electrical transformer stations.

It is designed and compared in dimensions with a market wrench.

The torque must be taken into account, so it is recommended to print it in ABS.

Downloadable files: OBJ and STL

I also attach Gcode prepared to print directly on an Artillery X1 with PLA from the house BQ.

Of course they should only be used by authorized industry professionals. I put it so that you have the possibility to have spare parts. I am not responsible for misuse and of course, do not download it if you do not agree.

This key is used to open electrical transformer centers.

It is designed and sized similar to a market key.

The torque should be taken into account, so it is recommended to print it in ABS.

Downloadable files: OBJ and STL

I am also attaching Gcode prepared for direct printing on an Artillery X1 using BQ PLA.

Of course, it should only be used by authorized professionals in the sector. I provide it so that you have the possibility of having spare parts. I am not responsible for misuse and, of course, do not download it if you do not agree.

Print settings:

• Print with supports, recommending placing it lying flat on the bed to reduce problems with twisting.

• Layer height used: 0.32 mm

• Filling 50%.

• Recommended material ABS (although PLA can be printed on and works).

• 5 perimeters.

Printing settings:

• Print with supports, recommending laying it flat on the bed to reduce torsion issues.

• Layer height used: 0.32 mm

• 50% infill.

• Recommended material ABS (although it can be printed and works with PLA).

• 5 perimeters.