Can Stein

Attending a festival each year and last year I got tired of all the wasps.
So this year I will be going in style with a Stein that can hold 50cl & 33cl cans.
Just insert the can and lock it in place with a 10mm rotation of the locking ring.

The stein comes with multiple options.
Smooth or "wooden" look of the stein.
Stitched seem, smooth or wrapped handle covers.
Knurled or smooth end rings on the hanlde.

The pictures of the printed steins are a bit modified to fit the place I'm going to use it at. The black one is for a friend with a logo he requested.
I do not own the licens of the crests or logos, there for they are not included in the files, but are uploaded for free on my page.
The viking crest can be found by searching for viking cup on another famous webpage ;) .
I also used fuzzy skin on the handle covers.

Outer diameter of the tube is Ø72,3mm, incase you want to add your own crest or text.

The insert for a 33cl low style can is also able to hold the new smaller soda cans if you flip the insert upside down and use the smaller locking ring.

Printed parts:
1x Can Holder
1x Handle Shaft
1x Lid
1x Lid Hinge
1x Lock
1x Lower ring
1x Top ring
1x Handle (Right and left half)
1x Bottom Cover
1x 33cl Insert
2x Hinge Plugg

Hardware needed:
4x Countersunk M4x25 for the handle and lid.
1x Button/sockethead M3x25 for the hinge.
1x M3 Lock nut for the hinge.
Glue for the handles and handle rings.

Don't forget to put the top ring in place before gluing the handlecovers.

Everything has been test printed in PLA on a Prusa Mk4
0.1 Layer height.

Supports has to be used on the Lid and Lid Hinge.