Flexable & Configurable Bookmark Stand by Jeff Smith

Jeff Smith

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

7 h

1 plate

4.0(1)

Boost

Released

Description

2nd Version of my bookmark stand that will work with many other bookmarks than mine. Can be configured for different sized bookmarks as well as stacked so the stand is as large as desired.

Comment & Rating (2)

@user_2000043990

Print Profile

0.2mm layer, 2 walls, 10% infill

Slots are very tight even with trying to fit the artists own bookmarks. Given that these Bookmarks are only 1mm thick, having such a tight tolerance in the slots can cause the bookmarks to bend and potentially snap. Given it's meant to be almost a universal fit, the slots should be thicker, not just wider, potentially closer to 1.5mm.

The designer has replied

@JeffSmith

Howdy. The slots are 1.35mm right now, and in my printed, and other printed feedback, they are just the right size so not sure why your print would be too snug. I've updated the model and added .25mm to the slot thickness putting them at roughly to accommodate for whatever reason your print might be snug. Hopefully the side-to-side control will keep that from being too loose.

No more