I've design 2-way fidget spinner featuring a gyroscope and a delightful flower design at its center.
For the gyroscope to work flawlessly the way you hold the spinner is important. You should place your fingers where the pins that connect to the inner ring are:
This is a print in place design and there are two versions that you can find in the profiles:
╭─━━━━━━━━━━━━━━━━━━━━─╮
Buy me a ☕️ or a 🍺
https://www.buymeacoffee.com/dpjrodrigues
╰─━━━━━━━━━━━━━━━━━━━━─╯
Checkout as well some of my other designs
For the multicolor AMS version I've design it in a way that is quite easy to choose the colors of each element. Just click in Objects in the Process tab and select which color you want in each element:
Important: I've designed this with very generous tolerances so that it is easy to print for everyone. That makes it easier to tear apart also but you can easily snap it in together.
Despite the generous tolerances, since this is a print in place design printer calibration is still quite important otherwise print may not work at all. If it doesn't work for you please calibrate your printer and/or make sure filament is dried.
╭─━━━━━━━━━━━━━━━━━━━━─╮
Buy me a ☕️ or a 🍺
https://www.buymeacoffee.com/dpjrodrigues
╰─━━━━━━━━━━━━━━━━━━━━─╯
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.