A handy little planter/ container, perfect for those small succulents or anything else you would like to put in it! Comes complete with a unique debossed leaf pattern to give it that nature look!
At the current scale, the dimensions are approximately 100x100x95mm so it would suit small succulents or other small items. You may wish to scale the model up/down to suit your plant/ needs. Please check and rescale as appropriate!!
Note: The design has been updated with thicker walls to ensure integrity at smaller scales.
Print Guide:
Walls/Perimeters: ≥2. This depends on the scale that you are printing at/ what you are going to put inside. I would not go any lower than 2 walls.
Infill: Gyroid 15%. At the standard scale, the model is mostly perimeters so this won't matter as much. If you are scaling the model up, you will benefit from higher infill.
Supports: None
Layer Height: Any. 0.2mm standard used here and the details show well. You could probably get away with a larger layer height, especially if you are scaling it up.
Material: Any. PLA used here but any can be used. If you plan on using this outside/ in direct sunlight, consider alternate materials with greater UV resistance.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.