Zip Top - Spinning Top by entropy

entropy

Toys & Games>Other Toys & Games

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.5 h

2 plates

4.3(12)

1 Plate AMS, 0.2mm layer, 2 walls, 15% infill

1.7 h

1 plate

4.9(9)

0.2mm layer, 2 walls, 15% infill

2.5 h

2 plates

Boost

107

224

123

Released

Description

This is not my original print. The original can be found here: https://www.myminifactory.com/object/3d-print-zip-top-spinning-top-14005

A spinning top toy powered by a single pull.

I've split the file into two plates to print parts in different colours. Added minimal supports for the handle and a brim for the top.

Comment & Rating (26)

@BEEG_Yoshi

Print Profile

0.2mm layer, 2 walls, 15% infill

great zip top dude

@user_2487772254

A very enjoyable old school toy! Wanted to print something for my youngest that dad played with or a version of it anyway. Had some trouble getting the spinner to adhere to the build plate even with the brims and failed at almost at the same place each time (include a pic of the fails) but 3rd times a charm thanks to a bit of hairspray. I was asked to create a spinner thats pink and blue so I’ll be making that at a later date. Printed in matte black and white filament. thanks for sharing the print.

@printerprinted

Printed great with elegoo PLA white and flashforge Burnt Titanium. Spins amazingly well, thanks!

@legendpilot

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great! Spins fast, for quite sometime. 40% infill on the Top made it just over 40g. A bunch of fun! Thanks :)

@AinOwge

Print Profile

0.2mm layer, 2 walls, 15% infill

Bed Adhesion Issue:Printed the spinner 2 times. First time with standards of the profile. 2nd one I added extra brim. Both times the spinner fell down in the middle of the print, causing some spaghetti in my chamber. Bad copy of a 9 year old model.

@user_2487772254

same happened to me I was using PEI textured plate, I used hairspray and it worked like a charm. if you look at my post you’ll see my fails in one of the pictures I’ll bet it failed at same point in the print your did.

@AinOwge

Replying to @user_2487772254 :

Yes, looks very similar. Tried to add some tree supports, this worked for me.

@nicotheredfish

Print Profile

1 Plate AMS, 0.2mm layer, 2 walls, 15% infill

works great ! had to try 2 times for the main part, it was falling even with larger brim. I added support and it worked the spinning is absolutely awesome