Hello there Star Trek fans!
I created this model for the mounting of the USS Voyager on the wall (created by Martin.Taichl, https://makerworld.com/en/models/91737#profileId-178158 ).
I created it so that it is possible to revolve the voyager around it mounting point. I also made it possible to change angle of display. So you are now able te place it as you would like. Besides the angle that can be changed i love it that it looks like the voyager is hanging in the air by itself.
Only thing you will need is a little screw (3,5mm x 12mm). And of course screw for attaching the mount to the wall, but that of course depends on the wall you have. I kept the holes in the wall mount smaller so you can drill out the holes if necessary and depending on the screws you use.
*If the voyager is revolving around it mounting point, the tolarance could be a little off. You can try and reprint it at 101% or just simply add a little bit of tape around the mounting point, that will probably keep it stuck to the position you like.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.