Middle / Lower Cup Holders - Vanagon Custom Center Console for Automatic Trans

The CBARRdesign.com Custom Center Console for the Vanagon with an Automatic Transmission was designed to be modular, functional and stylish. The Custom Center console can be expanded from the Main Large Cup holder and End Tray to include a coin holder tray, a lower cup holder as well as a pair of side shifter cup holders all connecting / plugging into each other. It is a perfect center console for those looking for something unique, versatile & looks great right out of the printer, but can also be painted and/or glued together.
Dimensions are Width x Depth x Height (in inches).
Width is dimension directions would be between seats, depth is from dash back and height is from floor.

• The middle / lower cup holder dimensions are (8x5x6) Included
• The main cup holder dimensions are (9x5x8.75) **
• The main end tray dimensions are (7x8x3) **
• The additional coin tray dimensions are (8x4x3) **
• The side shifter cup holder dimensions are (7,75x5x8.75) **

What you get:
- STL file needed for the Lower Cup Holder that connects to the Main / Basic Center console for a Vanagon with an Automatic Transmission between the Main Larger Cup Holder and the End Tray.

The Main / Basic Center Console is a separate download and consists of:
- One Main Large Cup Holder and the Main End Tray.

** Optional pieces that can be downloaded separately (main basic setup, coin tray or side shifter cup holders - Pictures of the entire setup are shown**

These designs were made for a larger printer 300 x 410 mm, however you may be able to print some pieces with a smaller printer.
The center console is designed exclusively for Cura and it’s suggested to be printed in ABS, PETG or PLA+, not regular PLA as it might not withstand temperatures inside a vehicle.