EasySqueeze Toothpaste Squeezer & Holder by codrey

codrey

Household>Other House Models

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

4.0(32)

Boost

150

263

447

287

Released

Description

Hi everyone!

Model

This innovative Toothpaste Squeezer not only ensures you squeeze out every last drop of toothpaste but also provides tidy storage. With its built-in position lock and threaded cap, it effectively prevents any wasteful unraveling of your toothpaste, giving you both efficiency and organization in one sleek design.

Assembly

Assembling your Toothpaste Squeezer is effortless. Start by inserting the end of the Key into the hexagonal divot in the Turner. No need for glue; the tolerance is finely adjusted for a seamless click-in fit. Then, position the Turner and Key into the Tube. Align the slot in the key with the corresponding slot in the tube and smoothly push in your toothpaste. Finally, secure everything in place by threading on the cap over the top of the key.

Upgrade your oral care routine with this Toothpaste Squeezer - the perfect companion for squeezing out every bit of freshness from your toothpaste while keeping your bathroom clutter-free. Make the switch and never struggle with toothpaste tubes again!

I'd love to see your completed builds. Don't forget to ❤️ Like and ⭐️ Rate!

Enjoy!

Comment & Rating (38)

@RAVER_AGG

Print Profile

0.2mm layer, 2 walls, 15% infill

Works well, but the gap is still a little too big when you print to the original size and you have to edit the gap minimally yourself.

Other Issues

@ronniie

Print Profile

0.2mm layer, 2 walls, 15% infill

Support Issue:Supports are quite annoying, change the threads for a better thread and remove the need for supports from the threads.

The designer has replied

@codrey

That sucks... I recommend using a pair of needlenose pliers to remove the supports, that should make it a lot easier. Thanks for printing!

@pitchblackcat

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

Support Issue:The default print profile puts supports everywhere, including the screw thread, where they fuse with the model I changed the settings to only support critical areas, which led to a crappy screw thread with some deformation, it worked though.

Strength Issue:I eventually printed 3 and 2 didn't even survive the initial loading of toothpaste tube; The layers of the print start to delaminate and everything breaks real easy. The way the model is designed and printed makes it really really easy to break.

The designer has replied

@codrey

Hi! I’m sorry this happened to you. In my print profile, I recommend using Tree Organic. It barely leaves behind any residue and is really easy to take off. Additionally, you could separate the parts on to different plates. Have a nice day! :)