Some small plant tags with little spikes designed to be pressed into moss or foam on a vertical surface

Please check the ‘Raw Files’ section to see the full list of available tags (and what I have in my plant collection lol).

The 3MF is setup for an automatic color change for the letters. To add new files in, just download the raw file and drag-drop it into the 3mf. No other work needed. 3MF does NOT have all available plant tags in it.

Plant tags are 1mm of white and then .4mm of the names. If you pause your gCode at a specific layer, you can do a manual filament change for the letters without an AMS.

Little spikes for the back are designed to be printed separately and then glued on the back (it just makes everything easier that way lol). You could print them the way the slicer auto-orients them, but they will be stronger if you print them with the spikes facing sideways (instead of straight up). You may also want to add a brim; I just slapped a painters tape on my build plate to make sure they didn't fall off since the surface area on the plate is small.

I could theoretically add more plant names to these if people want them. Can't guarantee I'll see requests for plant names though.