Spiderman keychain

Spiderman's face keychain

My printer does not support the M600 code for filament color change.

To print in 3 colors I present 2 options:

• The "1color.stl" file can be used to print in a single color, or if your printer supports the M600 code for filament switching, you can print in red from 0mm to 4.4mm, in black from 4.4mm to 4.6mm and in white from 4.6mm to 4.8mm.

• If your printer does not support the M600 code for filament change, as in my case, you have 3 files that are perfectly aligned. First you must print the file "RED.stl" in red color, then change the filament and print now the file "negre.stl" in black color, this file has a purge tower to clean the color and reach the height of 4.4mm, once you get there print the mesh and glasses in black color on the head in red, reaching the height of 4.6mm, then change to white filament and print the file "BLANC.stl", this file has a purge tower to clean the color and reach the height of 4.6mm and print the eyes in white on the glasses reaching the height of 4.8mm, for the white color is more defined, I recommend that you print at layer height 0.1mm, so you will have 2 layers in white 0.1mm and as the laminator crosses the lines, it is more defined.

Layer height: 0.2mm

Line width: 0,4mm

Filling: 40%

Supports: No need if you print flat side on the hot bed.