Chevrolet Logo
Copyright Claim
Chevrolet Logo
Boost
5
8
2
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
1.7 h
1 plate
Boost
5
8
2
1
15
1
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA BambuLab Matte Ivory White Transmission Distance: 3.3
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to Fossil Grey
At layer #25 (2.08mm) swap to Ivory White for the rest.
Comment & Rating (2)
All
Do you know the measurements?
The designer has replied
0
Reply
So these are easy to scale up and down,. just be sure to turn off “keep uniform scale” and once you’ve adjusted the size,. put “z” back to 100% and it should print fine unless you go really small.
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld