My son is obsessed with paw patrol so what better thing to do than make him a paw patrol clock. This is a hueforge for the front of the clock with embossed clock numbers and lines to give it that even more 3D feel. The good thing about this clock is when he outgrows paw patrol, all I have to do is replace the front and the hands to match what he is interested in at that time. This clock was printed on the P1S and does take up pretty much all of the bed.

For the front of the clock you can do AMS color swaps or manual as follows:

Start with Black
At layer #13 (1.12mm) swap to Red (I used Sunlu Red)
At layer #17 (1.44mm) swap to Silver (I used IIIDMax Silver)
At layer #19 (1.6mm) swap to White for the rest. (I used Sunlu White)

This clock face will be printed with 100% infill, at 0.08mm layer height but first layer at 0.16mm layer height.

The back and the hands were printed with 0.2mm layer height, 2 walls, 10% gyroid infill, and manual tree supports for the clock motor square (although I don't think it really needed it, I was just playing it safe). I chose to make the hands 100% infill, 4 layers, with print priority outer walls/inner walls)

All these settings are preset in the files you download so no need to add all of this into the project.