Poop Tower Game (purge escape - jenga style)
Poop Tower Game (purge escape - jenga style)
Print Profile(4)
Description
If you have a multicolor-printer generating lots of poop/purge/waste - then use some of it with this game! It’s is made to have fun with your Bambulab poops - enjoy!
The rules are simple: don’t drop the poop - but the game is hard to master.. Try it!
Overview
The game is all 3D-printed and consists of the following pieces:
- Tower
- Tower base
- Tower extension 1
- Tower extension 2
- Tower extension 3
- Tower top
- Beams (lots of them!..)
Assembly
The Tower should be easily assembled - snaps together - and when not in use, it can be taken apart to save some space.
Rules (Original)
Setup for a round:
- When the Tower is assembled, insert 4 beams in one of the top rows of the tower
- Then you each take turn placing 1 Beam in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)
- Fill purge/poop into the top of the tower - and then you are ready!
The game:
- In turn, carefully pull 1 Beam out of the Tower (must be in a section/extension that contains poop!).
- When a single purge/poop drops out at the bottom of the Tower in your turn - you loose the game/round!
Rules (Balanced)
Setup for a round:
- Do like Original rules above.
The game:
- In turn, carefully pull 1 Beam out of the Tower.
- If purge/poop drops out of the Tower in your turn, collect it.
- When all purge/poop is collected by players, the winner is the one with the most/least purge/poop (you choose!)
Note: this is an all new game - if you have suggestions on improving the rules or the model, please leave a comment or contact me directly!
Warning: as in Jenga, every fast move or careless shaking with the table can ruin your chances of winning - so be careful!
Print instructions
All parts should be fairly easy to print. But here is a few tips:
- Brim: Maybe. It can help with bed adhession on the tower parts. Not needed on the Beams!
- Supports: NO supports needed
- Multicolor: The tower extensions can be imported into the slicer and Split into parts, to easily color the different segments.
Want to show your support?
You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!
https://www.printables.com/@GlennovitS3D#join
Happy printing!
Comment & Rating (47)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
