Water pot for painting miniatures inspired by a well known brand.
Comes in 2 sizes.
Designed to be very hard to push over.

Includes a paint scrapper at the bottom and recesses to sharpen your brush.

Supports are required by this design so it only sits with an outer perimeter. Due to this design feature it is stable on uneven surfaces.

Printed with the following settings to be watertight:

• layer height: 0.2 mm
• nozzle 0.4 mm
• perimeter count: 6
• top & bottom count : 10 
  (the aim was to have at least 2mm of material at any given cross-section)
• infill: grid 17%