This simple model allows for the charging of both an iPhone and an Apple watch at the same time while taking up minimal space. The model supports Apple MagSafe wireless chargers and the standard Apple watch charger. This is only compatible with Magsafe devices at the moment. The iPhone can be mounted horizontally or vertically.

The top and bottom sections are separated for easier printing as well as customization. They are held together by two M3x16mm or M3x12mm Hex Socket Head screws. The base is 8mm thick with the screw being recessed into the base slightly to keep the bottom flush. The screw holes are 2.9mm in diameter and the screws will self thread the holes.

The MagSafe charger snaps into the opening with a friction fit and the Apple watch charger is set into the base. It is recommended to insert the watch charger before screwing in the top piece.

For printing, the base can be printed with only supports under the screw holes. To print the top it is recommended to print it upside down with tree supports under the cable channel openings and the top of the MagSafe hole.