GENSHIN IMPACT - NAHIDA BAS CELL PHONE JOYSTICK

Hello everyone I leave you this design of Joystick for cell phone, with similar format to PS4, it is expandable and supports a variety of cell phones and the base support of the beautiful Nahida, The archon dendro in the game Genshin Impact and hydro Slimes, so you can watch from there your favorite anime series!!!!!

Adapter expands from 156mm x 80mm up to 240mm x 118mm, prints in 6 parts:

1- Right handle

2- Left handle

3- 2 Horizontal guide rods

4- 2 Vertical guide rods

5- Thread

6- Central trapeze

Nahida's base is printed in 6 parts.

1- Left Slime Base

2- Slime Base Right

3- Nahida's body

4- Nahida's head

5- Nahida's tiara

6- Nahida's bracelet

To note for the joystick; The horizontal bars are placed and glued one in each grip, these grips have a circular mark on the back indicating where these guide bars are inserted (shown in the last picture of the printed joystick model).

I RECOMMEND IT FOR PRINTING WITH 3D PRINTERS OF PLASTIC EXTRUSION.

For better printing, if you work with CURA I recommend downloading the "custom support" add-on, so you can configure the supports where you like, I use it for all my models, especially in parts where there are clothes that have protrusions or protrusions where the default support does not get to apply correctly!!!, I also recommend joining the parts of the model with plastic glue.

Enjoy!!!!

If you want to see more models visit my profile!!!!!

https://cults3d.com/es/usuarios/p3impresiones3d/modelos-3d

The images of the model are by Cura

With the following parameters for PLA:

Layer height 0.18mm

Wall thickness 1.32mm

Wall line count 3

Filling density 10%

Grid pattern

Extrusion temperature 200°C

Plate temperature 60°C

Printing speed 50mm/s

Wall speed 25mm/s

Normal Support

Placement in all locations

Zigzag pattern

60° support angle

Type of adhesion

raft