Skip to content

Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone

1.jpg Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
2.jpg Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
3.jpg Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
4.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
5.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
6.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORÇO-LEG-LAND-1.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORÇO-LEG-LAND-2.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORÇO-LEG-LAND-3.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORÇO-LEG-LAND-4.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORÇO-LEG-LAND-5.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORÇO-LEG-LAND-6.png Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORCO LEG LAND V1.stl Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
REFORCO LEG LAND V2.stl Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 320 views
License
3D design format
3MF, GCODE, RAR, and STL Folder details Close
  • PROJETO_BQ_PLA_REFORCO LEG LAND V1 3XA e 3XB.3mf
  • PROJETO_BQ_PLA_REFORCO LEG LAND V2.3mf
  • REFORCO LEG LAND V1 3XA e 3XB_BQ_PLA_RS02_29_3h44min.gcode
  • REFORCO LEG LAND V1.stl
  • REFORCO LEG LAND V2.stl
  • REFORCO LEG LAND V2_BQ_PLA_RS00_75_1h24min.gcode
  • STEP.rar

Learn more about the formats
Publication date 2024-01-04 at 13:16
Design number 1687401
emanuelrsilveira

emanuelrsilveira

3D printer file info

3D model description

Reinforcement and repair for the Leg Land of the S500 and S550 FPV Quadcopter Multirotor Drone. Along with the download files is the STEP that allows you to edit the project according to your needs if necessary.
A propeller on my drone broke and made it fall to the ground from a height of 200 meters, one of the legs broke and I didn't have a spare leg, I designed this reinforcement, I applied quick glue, it fit well, it even looked like it was part of the frame, it wasn't necessary to put it on the other leg but for reasons of balance and aesthetics I put it on the other leg too. I've done several flights after installing the reinforcement, everything was normal, I won't need to change the leg anymore.
(Note: there are two types of land legs, when buying the drone frame they look the same, but have small differences, I made a reinforcement for each of the two models)

Link where I bought the Hawkeye Firefly Split Naked V4 camera (records in 4K):
https://s.click.aliexpress.com/e/_DDCmZv7

Link where I bought the damping rubber:
https://s.click.aliexpress.com/e/_DFpJTYt

Link where I bought the frame with 4 S500 engines:
https://s.click.aliexpress.com/e/_DdbCHeH

Link where I bought the frame with 6 S550 engines:
https://s.click.aliexpress.com/e/_Dd7NVwd

Link where I bought the frame with 4 F450 engines:
https://s.click.aliexpress.com/e/_Dk6ICIZ

Link where I bought the Propeller Engine Kit:
https://s.click.aliexpress.com/e/_DBqNfZF

Link where I bought the ESC Speed Controllers (I recommend 30A minimum):
https://s.click.aliexpress.com/e/_DE4SRvj

Link where I bought the LIPO 3S 5200mah battery (15 to 20 minutes of flight):
https://s.click.aliexpress.com/e/_De7SvUp

Link where I bought a complete Pixhawk flight controller (with GPS and Telemetry):
https://s.click.aliexpress.com/e/_DcvJJ0t

Link where I bought a 600mW video transmitter (I got a maximum range of 200 meters with it):
https://s.click.aliexpress.com/e/_DCYCfDb

Link where I bought a 1.6W video transmitter (I got a maximum range of 800 meters with it):
https://s.click.aliexpress.com/e/_DELZVml

Link where I bought Skydroid video receiver (Fits the two types of transmitters above):
https://s.click.aliexpress.com/e/_DmXkHuv

Link where I bought the Radiolink AT9S PRO Radio Control (approximate range 4KM, I'm very satisfied with it):
https://s.click.aliexpress.com/e/_DBDgk3j

Link where I bought the PRM-03 temmetry module (To send real-time information to the Radio Control screen):
https://s.click.aliexpress.com/e/_DeQYEZr

3D printing settings

Nozzle 0.4mm
Layer height 0.15mm
Wall 2mm
Line Width 0.6mm
Infill 25%
Support Angle 70%
Support Infill 45%
Brim between 10 and 15
Material PLA
Speed 20mm/s
Heated Table 60°C
Initial Layer Nozzle 212°C
Nozzle other Layers 195°C

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.