SHELF AND DISPLAY STAND FOR SWITCH PS5 PS5 PS4 XBOXONE BLURAY DISC GAMES

Support for shelf and exhibitor video games. The cases of the games are stored and protected in these cases that in turn you can attach it to a shelf and have them organized and always have an easier way to have your favorite games.

by turning the design upside down, they can also be used as a display stand.

the protective housings and decorative covers are held in place by magnets and the shelf support by a screw.

the design has slots for attaching an LED strip.

STL FILES:

-PROTECTOR HOUSING SHEATHING MAGNET (10x2mm) SWITCH.stl

-SWITCH HOUSING SUPPORT.stl

-SWITCH CASING SUPPORT COVER.stl

-LARGE SCREW SUPPORT.stl

-MedIUM SCREW SUPPORT.stl

-(ASSEMBLY)ALL STL STAND NINTENDO SWITCH.3mf

-PROTECTOR CASING PS5-PS4-XBOXONE-BLU RAY.stl

-HOOD COVER PS5-PS4-XBOXONE-BLU RAY.stl

-CASE SUPPORT COVER PS5-PS4-XBOXONE-XBOXONE-BLU RAY.stl

-LARGE SCREW SUPPORT.stl

-MEDIUM-SIZE SCREW SUPPORT.stl

-ALL STL RACK STL PS5-PS4-XBOXONE-BLU RAY.3mf

NOTE:

-The two 3MF files are for you to see the position when laminating that gave me the best result.

-The STL of the screws is valid for all models.

-The covers with the logos I do not include them, for respecting the copyright of

the brands.

English:

Video game shelf and display support. The game cases are stored and protected in these cases, which in turn can be attached to a shelf and kept organized and always have your favorite games in an easier way.

By turning the design around they can also be placed as a display.

The protective casings and decorative covers are held in place by magnets and the shelf support by a screw.

The design has some slots to be able to stick an LED strip on it.

STL FILES:

-MAGNET HOUSING PROTECTOR (10x2mm) SWITCH.stl

-SWITCH HOUSING SUPPORT.stl

-SWITCH CASING SUPPORT COVER.stl

-LARGE SCREW SUPPORT.stl

-MEDIUM SCREW SUPPORT.stl

-(ASSEMBLY)ALL STL NINTENDO SWITCH SHELF.3mf

-PROTECTOR CASE PS5-PS4-XBOXONE-BLU RAY.stl

-PS5-PS4-XBOXONE-BLU RAY.stl HOUSING SUPPORT

-CASING SUPPORT COVER PS5-PS4-XBOXONE-BLU RAY.stl

-LARGE SCREW SUPPORT.stl

-MEDIUM SCREW SUPPORT.stl

-ALL STL SHELF PS5-PS4-XBOXONE-BLU RAY.3mf

NOTE:

-The two 3MF files are so you can see the position when laminating that they have given me the best result.

-The STL of the screws is valid for all models

-I do not include the covers with the logos, to respect the copyright of the brands.

Printed on PLA, ender S1 and Creality K1.

Basic parameters

Initial layer 0.32

Layer height 0.24

Wall lines 3

Upper and lower layers 3

20% fill

backfill 35% minimum only SUPPORT, it is the part that will have to withstand the most force.

EXPANSIONS:

holes for 10mm x 2mm magnets.

the area where the magnets go, I have given them a horizontal expansion of 0.4. I advise before printing the whole piece and waste material, to cut the piece and test the expansion of holes. In cura I do well like this, but in orca slicer it changes a little, so better to test depending on the laminator and printer.

SUPPORTS:

I recommend an object support xy distance of 0.68mm for easy removal of the supports.

English:

Printed in PLA, ender S1 and Creality K1.

Basic parameters

Initial layer 0.32

Layer height 0.24

Wall lines 3

Top and bottom layers 3

filling 20%

35% minimum filling only SUPPORT, it is the piece that must withstand the most force.

EXPANSIONS:

holes for 10mm x 2mm magnets.

The area where the magnets go, I have given them a horizontal expansion of 0.4. I advise before printing the entire piece and wasting material, cut out the piece and test the hole expansion. In cura it works well for me like this, but in orca slicer it changes a little, so it's better to try depending on the laminator and printer

SUPPORTS:

I recommend an xy object support distance of 0.68mm for easy removal of the supports