handguard motorcycle

Hand protection motorcycle

I installed this handguard on my Kymco scooter “Exciting”.

In the pictures you can see a small, rounded example on the left of the scooter and a large, square one on the right.

Fastened on the outside with the screw from the knob, on the inside I drilled two holes (Ø4) and just lightly pressed it against the handlebars with a cable tie.

100% filling is only applied in the area of ​​the mounting hole, the rest 20%:

MATERIAL PETG or PLA.

SUPPORT = 60°

PRINT AT YOUR OWN RISK! I have designed this thingy and release it publicly with no guarantee or insurance of its fiction, performance, or safety. I am not a professional Mechanical Engineer or Motorcycle Parts Manufacture. I am a hobbyist that had a problem I wanted to fix, and want to share that fix with anyone else that might need it too. Using this thingy may cause injury or death (so does motorcycling but we all still do it). I just want everyone that wants to use this to be smart about it! My first failed prints and designs rendered some functions of the bike more difficult (like shifting and turning). I wanted to get most of that stuff sorted before I released these files, but I can't guarantee that you don't experience a failure or two of your own! Be smart! Ride Safe! Wear your gear!