TechGuard Toolbox

The Professional Tool Box is an exceptionally versatile product that adapts to the needs of any professional or hobbyist. With optimum storage capacity, this box is designed to organize and protect tools of all types, from the smallest to the largest.

Manufactured with high quality materials, this box guarantees strength and durability. Its robust design withstands constant use in demanding environments, keeping tools safe and in perfect condition. 3D printing, performed with an FDM printer, adds a touch of customization and allows the box to be scaled to the desired size, providing flexibility according to the user's specific needs.

Ease of transport is achieved thanks to an ergonomic handle, making it easy to carry all the tools from one place to another effortlessly. This Professional Tool Box is not only a functional item, but also a statement of organization and efficiency on the job. With this box, your tools will always be tidy and ready for the next project.

Material:

PETG or ABS: Both are strong and durable materials. PETG is easier to print and less prone to deformation.

Printer Configuration:

Nozzle Temperature:

PETG: 230-250 °C.

ABS: 230-260 °C.

Bed Temperature:

PETG: 70-80 °C.

ABS: 90-110 °C.

Print Speed:

PETG: 30-60 mm/s.

ABS: 40-80 mm/s.

Layer height:

Select a layer height of 0.2 to 0.3 mm for a good balance between speed and quality.

Print Software Configuration:

Bed Adhesion:

Use a warm bed surface and, if necessary, apply painter's tape or lacquer for better adhesion.

Cooling:

Set moderate cooling (20-50%) to avoid deformation.

Supports:

If necessary, use brackets for parts with overhangs or complicated geometry.

Walls and Infills:

Configure at least 2-3 walls to obtain a robust structure.

Backfill of 20-30% should be sufficient to maintain strength.

Shrinkage:

Adjusts retraction to avoid stringing and associated defects.

These are general parameters and may vary depending on printer brand and filament. It is recommended to perform some tests to adjust the parameters according to the specific characteristics of your printing configuration.

Link To Fabrication Video

https://youtu.be/fkBCysQhYkA?si=T9O6SyNv41baz_MQ