Pawn Vase Soap Dispenser
Pawn Vase Soap Dispenser
Published 2024-01-08T13:02:58+00:00
This can either be a Vase or Soap Dispenser, both files are included in download. Designed in Blender, edited in Ideamaker, Zbrush, and Cur3d. I hate the little soap dispensers you have to keep filling up and tip over unless you hold it and use the pump, and they don't make for very nice decor. I wanted it to look a little decorative and modern, but with a vintage feel from the shape. It is designed to fit a soap bottle pump, but you will have to measure yours to be sure of fitment. I took inspiration from a pawn used in playing chess. With the wider heavier base, this will not tip over easily and allow you to press firmly down without holding it. If you don't need a soap dispenser, it will still make a nice vase.
NOTE: for the soap dispenser you may have to scale up or down 1-3% depending on your soap bottle pump choice, and also your printer calibration settings could vary.
This model is printed without Supports, at .2 layer height and 20% infill. I recommend 3 shells to help make it watertight.
Date published | 08/01/2024 |
Material Quantity | 90-110 grams |
Dimensions | 131.73mm x 132.27mm x 148.92mm |
Support Free | YES |