Brake discs and calliper for 24th scale model cars
Brake discs and calliper for 24th scale model cars
3D
Published 2024-01-08T14:20:22+00:00
UPDATE: Just added a second design for the brake calliper. So now you can choose to add a large calliper on the front discs and a small calliper on the back discs if you want.
I have made a set of brake discs and brake callipers, originally for a 1/24th scale Mercedes-Benz 300SL by Tamiya. But then I decided to make the discs in different sizes, and make them available to you, in case you also need some 1/24th scale brakes for your next plastic model car.
This inculdes 4 different patterns for the brake discs, in three differents sizes (Ø13mm, Ø14.2mm and Ø16mm). And a large brake calliper in the style of a Brembo calliper.
They fit perfectly on the wheels of a Tamiya plastic model car in 1/24, and it has been tested on several models, the VW 1300 Beetle (24136) and the Mercedes-Benz 300SL (24338).
Please note that this model is scaleable, but the center hole in the disc might not work as intended if the model is scaled.
If you are looking for some wheels to go with your brake discs, then go and check out my profile, I have a few options for wheels, that goes together with this brake set and they fit your Tamiya models too.
Feel free to go and check out my profile for more printable stuff for your model cars and scale dioramas.
Recommended printing on a resin printer, at layer eights around 0.02-0.01mm for det best results.
These have been test printed at 0.02mm and on a 4K and 6K resin printer, with great success.
| Date published | 08/01/2024 |