Warcry Premium Magnetic Box for tokens

Premium magnetic box to store all the tokens included in the Warcry core box. TOKENS ARE NOT INCLUDED. Also in this box, you can keep track of victory points and turn in play.

Printing difficulty: MEDIUM

You will need 16 neodymium magnets size 6x3mm which you can buy from AMAZON.

Printing instructions for the premium magnetized token box:

You will need 16 cylindrical neodymium magnets of size 6x3mm. 8 magnets for the lid and 8 magnets for the base.

• You need to print the base and lid separately.

INSTRUCTIONS FOR PRINTING THE BASE.

• When printing the base you must enter a printing pause to change color so that the letters "VP" Victory Points and "T" Turn are a different color than the base.

• Later, you will need to add a new pause to be able to insert the 8 neodymium magnets size 6x3mm. They are a snap fit, you may need a flat, rigid piece to apply enough pressure for the magnets to push in (I use a thick metal flat file to do this).

• Once you resume printing with the magnets in their holes, the printing will end. You will need to print a small red skull and another blue skull. You can press them into the two holes provided for the skulls.

INSTRUCTIONS FOR PRINTING THE COVER.

• The cover is printed with a single material. You will need to add a print pause to insert the 8 magnets at the right time. Check that the polarity of the magnets is correct so that they close correctly with the base.

• Once the printing is finished, you need to print one large skull and 8 small skulls for the correct finish of the lid.

• The large skull needs the use of glue. Use cyanoacrylate and be careful to use a small amount on the forehead area of the skull without protruding into the eyes, since if this occurs, the "frost" effect will be generated.

• The small skulls snap together, you won't need to add any glue. I recommend printing a few extra skulls in case one breaks in the process.

It is important to know that the resolution and error tolerance of my printer allows this design to fit perfectly. A different calibration may generate different results, but you can contact me if you need it at despropositoys@gmail.com.

IMPORTANT.

All my designs have an industrial patent registered, I do this to avoid plagiarism and illegal distribution of my works. I don't mind at all if you print for yourself and your friends to have fun, enjoy and expand our hobby. But please act legally. I am not a large company, I am a person who personally designs, manufactures and ships each piece that exists in my store. If any design is used for commercial purposes, I will take action with the full force of the law and the full force and blessings of Grandpa Nurgle.

Layer heigh:

0.20 for quality print.

0.30 for normal print.

You need 16 cylidrical magnets 6mmx3mm