Kemogao - Animegao/Kig style Fursuit head base

If you purchase this file and believe it needs modifications before printing please contact me so I can update the files for you!~
This file is intended for large printers but I have included versions that are but into two pieces for you to print as four parts to assemble for smaller print beds.

This was modeled around my own head as reference:
About 21 in / 53.5 cm diameter
About 9 in / 23 cm from top of head to chin
It should have PLENTY of wiggle room for larger heads and fans at it's default print size, but do consider it's scale before printing in case you need to make it larger or smaller.

Version 2 .STL Information [JAN 11 2022]:
Face Parts:
- Wall thickness: 3-4 mm
- Default Width: About 257 mm
- Default Height: About 272 mm

Nose Piece:
- Default Width: 31.5 mm

Headback:
- Default Depth: About 183 mm
- Default Width: About 257 mm
- Default Height: About 258 mm
- [NEW] HEADBACK EDIT For easier wear

Introducing "KemoGao"! A kigurumi inspired fursuit head base & My first 3D modeled fursuit base.
It features large eyes & a very short & wide muzzle meant to mimic anime style creature faces that are closer in looks to "Klonoa" vs. standard kemono style faces with a small protruding muzzle.

Named after Animegao アニメ顔 ("Anime Face") style kigurumi and also a play on "Gao" being both "face" 顔 and the sound "がお" a wolf makes. "Kemo" as a shorthand for "Kemono" being "Japanese style" furry. Becoming "Kemogao".

• A lifetime of updates for free*

**Any changes made to update this file for easier printing or use will be redistributed to buyers free of charge, simply show proof of ownership and allow for me to contact you or you can contact me on any of my social media!

Contact Info:
twt: https://twitter.com/nathahniel
e-mail: nathahnielartist [!at] gmail.com
Etsy: https://www.etsy.com/shop/Nathahniel
Ko-Fi: https://ko-fi.com/nathanier
Gumroad: https://nathahniel.gumroad.com/

RULES:

DO NOT sell or distribute this .stl file
DO NOT upload this file to sites like thingiverse, sketchfab, etc.
You may send these .stl files to an artist to request or commission an edit. The artist is not required to purchase the fileif you are providing it.
You are welcome to use this for crafts other than fursuit heads.

SELLING BASED ON THESE FILES:

You CAN sell "remixes" (heavily edited) versions you create of this file. The edits must be substantial (ex: major changes to eye/mouth shape, additions to the mesh).

Can be used for commissions and personal use.
Not intended for large corporate commercial use, this is for freelance artists or personal use only.

You may sell up to a total of 30 prints of any version in these files of this head per year.
You may sell as many premades or commissions made using this head as desired.