Minimalistic magnet movement trays

EDIT 27/01/2024: Added trays for 32x32 bases to be compatible with the round base adapters. Also improved magnet spacing for small trays and added 1 and 2 files.

Movement trays for rank and flank games prepared for magnetized models. Glue a magnet in the holes and cover with a steel sheet. You can then put your magnetized models on top, and your whole tray can also be placed on a steel shelf in your transport box. You can also put size adapters, also available in my profile, on top of the steel sheet.

They are available for all the combinations of the following bases, for 1, 2, 3, 4 and 5 ranks, for 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 columns:

• 20x20 old infantry
• 25x25 light infantry
• 30x30 heavy infantry
• 32x32 round bases (adapter sold separately)
• 40x40 monstrous infantry
• 50x50 monsters
• 25x50 light cavalry
• 30x60 heavy cavalry
• 50x100 chariots
• 50x75 big monsters
• 40x60 monstrous cavalry

There are also a set of all the combinations for the following magnet sizes:

• 12x1mm
• 10x1mm
• 8x1mm
• 6x1mm

I recommend the 10x1mm for most cases though.

A total of 1600 designs for all the combinations (4 magnet sizes x 10 base sizes x 5 ranks x 8 columns).

These trays do not have an edge, the profile of the unit is the same as the models without tray. It is also fairly thin, only 1.5mm.

PLA printers are good enough for this. Maximum layer height should be 0.5 mm.