bridge, Bridge

This bridge model is specifically designed for 3D printing. The original model has dimensions at the base: 10.5 cm in length, 6 cm in width. The overall height of the bridge from the base is 5 cm, and the height of the bridge railing is 3.2 cm. The model consists of three parts: the bridge railing, the main road made of boards with round pegs, and the closing boards of the road with rectangular pegs.

This model can be used for your DND party or any other role-playing game. Additionally, it can be utilized in your architectural project. If you need any size adjustments, please indicate them in the comments for this model, and I can modify it to fit your specifications.

A model of a bridge created specifically for printing on a 3D printer. The original model has dimensions at the base: 10.5 cm in length, 6 cm in width, total height of the bridge from the base 5 cm, height of the bridge fence 3.2 cm. This model has 3 parts: bridge railings, main road made of boards with round spikes, trailing road boards with rectangular spikes.

This model can be used for your party in dnd or other roleplaying game, besides can be used in your architecture project.

In case you need to change the size, write in the comments to this model, I can change it to your size.

A) Printing of bridge railings:

1. Start the "Bridge" document

2. Lay the model flat as indicated in the 3rd image.

3. Multiply the model to 2 pieces.

4. Arrange as compactly as possible

5. Print

B) Printing basic boards with a round spike:

1. Start the document "Board_1"

2. Lay the model flat as indicated in image 4.

3. Multiply the model to 15 pieces.

4. Arrange as compactly as possible

5. Arrange as compactly as possible

6. Print

C) Printing of Closing boards with rectangular spike:

1. Start the document "Board_2"

2. Lay the model flat as indicated in image 5.

3. Multiply the model to 2 pieces.

4. Arrange as compactly as possible

5. Arrange as compactly as possible

6. Print

A) Printing the bridge railing:

1. Open the "Bridge" document.

2. Place the model flat, as indicated in Image 3.

3. Duplicate the model 2 times.

4. Arrange them in the most compact way possible.

5. Start printing.

B) Printing the main boards with round pegs:

1. Open the "Board_1" document.

2. Place the model flat, as indicated in Image 4.

3. Duplicate the model 15 times.

4. Arrange them in the most compact way possible.

5. Start printing.

C) Printing the closing boards with rectangular pegs:

1. Open the "Board_2" document.

2. Place the model flat, as indicated in Image 5.

3. Duplicate the model 2 times.

4. Arrange them in the most compact way possible.

5. Start printing.