WORX on DYSON V6

Worx PowerShare 20V adaptor for DYSON V6 cordless vacuum cleaner

**New model 2024!

To avoid index finger cramps ;-)

You have the option of using the vacuum trigger and a switch for permanent operation.

You can install only the micro switch for the trigger or only the switch.

The three WORX battery models.

EU and US tested.

And as a gift, a stand for Dyson accessories.

If your Dyson battery dies,

rather than buy a replacement battery (or a replacement vacuum cleaner),

use this adapter.

Our Dyson vacuum cleaner is a beautiful tool,

but when the battery is empty we have to stop working.

I solved this problem. The battery is now external.

The vacuum cleaner works much better with the larger 4 amp-hour battery.

*Normally the Dyson cuts the battery when under voltage, it makes several steps, stops and then stops *.

**Do not insist and change the battery.

2 possibilities, with or without voltmeter.

Remove WORX batteries from adapter to charge and store vacuum cleaner.

Supplies

9 Wood screws 3 X 16mm

2 Flat terminal 6.3mm

1 Spring 5.5 X 17.5 mm

2 female terminals

2 non-insulated 4.8 mm female terminals (or solder wire)

1 Micro switch 20 A

Cable

1 Rocker switch

Rocker switch

4.8 female electric crimp terminals

Terminaux femelle

Spring

Flat terminal 6.3mm

Micro switch

Voltmètre

WARNING! check your wiring before use to avoid damage. Reversed polarity can be fatal.

With CULTS license Private use,

you are authorized to manufacture adapters for your own use.

It is not permitted to resell or give away the files and adapters created.

With brackets and 80° cantilever angle

There are very few brackets, and they're easy to remove.

-Layer height: 0.2 mm

-Filling density: 30%.

-Number of wall lines: 3 or 4

-Top and bottom layers: 4 or 5