Display Spacer / Cable Management (P1P/P1S)
Display Spacer / Cable Management (P1P/P1S)
Print Profile(1)
Description
This is a display spacer (6.5mm) with integrated cable management for the P1P and P1S.
For example, it can be used to route the cable of the foldable X Touch housing so that no hole needs to be drilled in the housing.
It has the same shape as the display base itself. In the correct black you can't see any difference to the original.
The safety clip to prevent the display from slipping is integrated.
There is an opening at the top right to feed a cable in or out of the housing.
Depending on the accuracy of your settings, burrs may need to be removed with a file or sharp knife. The dimensions are chosen so that nothing rattles.
Use PETG as support for a PLA print and vice versa. The support can be easily removed.
Adjust this interface setting here with your support-filament before printing with your filaments:
Comment & Rating (8)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
