Ring Doorbell Cover / Blanking Plate

Why cover your Ring Doorbell?

When your baby/Grandchild is having midday nap and you do not want the Ring Doorbell to wake them up.

You have night shift workers who are trying to get sleep during the daytime (I did this for 10 years and doorbells were the enemy)

This cover slides over the existing Ring doorbell to stop delivery drivers ringing it.
I decided on sliding design as some people have their doorbells flush to a wall and it is not possible to make one with 4 sides as there is no room.

This model is slightly bigger than the door bell, so you can either change the sizes of the STL files or use some Blutak on the top of the cover to secure when in use.

2 files are included
1. Ring Battery Cover – for the standard Ring Doorbell with the Black on top and Silver on the bottom
2. Ring Wired Cover – for the Ring Doorbells which are wired via a transformer and are smaller than the Battery version.

Note: This cover will also blank out the security camera on the Ring – so please bear this in mind
I did try some prototypes with a hole in, but it restricted the camera angle and also defeated the object of covering the doorbell.

No Supports required

I used PLA however PLA+ will be fine
Printer: Creality Ender 3 V2 Neo Stock build
Layer Height 0.2
Initial Layer Height 0.2
Line Width 0.4
Wall Line Width 0.4
Outer Wall Line Width 0.4
Inner Wall Line Width 0.4
Top/Bottom Line Width 0.4
Infill Line Width 0.4
Skirt/Brim Line Width
Initial Layer Line Width 100%
Infill Density 10%
Infill Line Distance 12.0mm
Infill Pattern Cubic