Buffalo Bills Logo ART Hueforge by PAPA Emeritus IV

PAPA Emeritus IV

Art>2D Art

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

5 h

1 plate

5.0(5)

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5.1
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.88mm) swap to Blue
At layer #12 (1.36mm) swap to Red
At layer #17 (1.76mm) swap to Jade White
At layer #20 (2mm) swap to Blue
At layer #24 (2.32mm) swap to Red
At layer #27 (2.56mm) swap to Jade White for the rest.

Comment & Rating (18)

@martygirl35

Boosted

This will be my first attempt at a Hueforge print. I tried to scale it up to 125%, but it messed up the colors, and made the black parts on the top layers turn blue. Is it possible for to scale up in the slicer and keep the coloring, or is this something that can only be done in Hueforge? Also, I noticed you have instructions for swapping filament. If I'm using AMS, I don't need to worry about swapping anything, right? Thanks! Can't wait to print this!

The designer has replied

@PAPAEmeritusIV

you can up scale it you want, just make sure you don't up scale the z portion. upscaling z will upset the colors. other then that you will have no issues if your pulling my project into the side on a computer the color swaps will already be set up. you see them sure up when you slice it.

(Edited)

@martygirl35

Boosted

Replying to @PAPAEmeritusIV :

Awesome! Thanks!

@PAPAEmeritusIV

Replying to @martygirl35 :

your welcome, if you need anything just let me know

@Studio727

Print Profile

0.08mm layer, 1 walls, 100% infill

Looks good but I don’t understand why this goes through all the colors twice?

The designer has replied

@PAPAEmeritusIV

I can upload a more simple version, but it won't have the color depth. for example the blue that is physically on the black won't be as vibrant as the blue that is higher up

(Edited)

@PAPAEmeritusIV

I will upload a simpler and faster version for everyone, but will be a about 5 hours from now as I need to test it and I already have another design running

@martygirl35

Boosted

Print Profile

0.08mm layer, 1 walls, 100% infill

Awesome print! Go Bills!