F-22 Raptor Model + Stand
Copyright Claim
F-22 Raptor Model + Stand
Boost
37
61
13
Print Profile(1)
0.12mm layer, 2 walls, 25% infill
Designer
3.1 h
1 plate
Boost
37
61
13
0
150
111
Released
Description
F-22 Model in Scale with Stand.
Printed with support-structure.
Maybe a better first layer of the wings would be possible by using other settings.
Comment & Rating (13)
All
Print Profile
0.12mm layer, 2 walls, 25% infill
you need tpu to print it. doesn’t use normal support
(Edited)The designer has replied
1
Reply
did you have a picture of the result? :)
(Edited)0
Reply
Replying to @Downhill_Soluti
I already threw it away :(
I can print it again though
0
Reply
hmm mine works relatively good with petg as support surface.
but i think there is a lot potential for a better print. if i got more time, i will try it again and add a better print profile
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
Great print
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
less supports and it would be a 5
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
Was not quite hassle free however the print came out really well. despite my attempt to clean up the print I ended up fraying a part of the print. May try again, but definitely will have to work this one to get it right. Great model though.
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
Support Issue
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
Support Issue
Strength Issue
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
(Edited)
0
Reply
Print Profile
0.12mm layer, 2 walls, 25% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld