French Bulldog Crown HueForge
French Bulldog Crown HueForge
Boost
17
31
9
Print Profile(1)
0.08mm layer, 2 walls
Designer
3.6 h
1 plate
Boost
17
31
9
0
48
23
Released
Description
2D Art Picture of a French Bulldog wearing a Crown
can be printed with one AMS Unit
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used (For example)
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #8 (0.76mm) swap to Dark Gray
At layer #13 (1.16mm) swap to Light Gray
At layer #19 (1.64mm) swap to White for the rest.
Comment & Rating (9)
All
Print Profile
0.08mm layer, 2 walls
me a encantado el diseño de 10
2
Reply
Print Profile
0.08mm layer, 2 walls
The designer has replied
2
Reply
thank you for your Rating and the posted picture <3
(Edited)1
Reply
Print Profile
0.08mm layer, 2 walls
2
Reply
Print Profile
0.08mm layer, 2 walls
1
Reply
Print Profile
0.08mm layer, 2 walls
1
Reply
Print Profile
0.08mm layer, 2 walls
1
Reply
Print Profile
0.08mm layer, 2 walls
1
Reply
Print Profile
0.08mm layer, 2 walls
1
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld