MTG Linkage Lid Deck Box - Triple (print in place)
Copyright Claim
MTG Linkage Lid Deck Box - Triple (print in place)
Boost
19
38
13
Print Profile(4)
70+ v1
Designer
6.8 h
1 plate
100+ v1
Designer
8.1 h
1 plate
80+ v1
Designer
7.2 h
1 plate
60+ v1
Designer
6.4 h
1 plate
Boost
19
38
13
0
93
54
Released
Description
A triple deck box; available in various sizes. Let me know if you need a different size and I can add it.
The number refers to the number of double sleeved cards that will fit. If you want the single sleeve count, multiply that number by 1.25. (The 80+ will fit a single sleeved commander deck).
Print Settings
The model is designed to be printed with 0.4mm nozzle, 0.2mm layer height and no supports.
I recommend to printing with 2-3 walls and 15%+ infill for good strength. It's also best to use a brim to help the lid adhere to the bed.
The arms should probably be printed with even more walls (5+) and infill (50%+) for better longevity.
Comment & Rating (13)
All
Print Profile
100+ v1
Lid had a large crack down the middle using this profile, ymmv
The designer has replied
0
Reply
Hmm, I've never seen that happen on any of the prints I've done. I guess it could just be bad luck. I've got no idea what might have caused that.
0
Reply
Replying to @BlueBeka
Unsure as well, was printed with BL Basic PLA. Was pretty disappointed to go downstairs and see that lol. I'll have to take a look at the video and see what happened when I get home from work
0
Reply
Any way to get an STL of this? I havent been able to get bambu slicer to work. Would love to print it but use prusa slicer
~Edit~ Found out i can export it as an STL from bambu~
(Edited)The designer has replied
0
Reply
Click the "Download Raw Model files" button above to get step files. I think most up-to-date slicers can slice them, and they slice better than stls.
0
Reply
i have printed one of these in PC and it worked great! i printed one in a silk PLA and it messed up a bit on the linkages and then i failed 2 in other colors silk PLA. then i got 2 to work in different PLA silks. from what ive learned is the stronger the material, the better the base settings of this file works. havent tried abs yet and i havent ever used petg.
Question: i have 4 of these boxs now and i have decks in all the slots, is there something out there that i can use to easily pull just one deck out at a time?
0
Reply
love these boxes
0
Reply
Print Profile
70+ v1
great design! I do wish it listed dimensions in the details but great design otherwise. printed in BBL PLA and works great!
0
Reply
Print Profile
70+ v1
0
Reply
Print Profile
100+ v1
0
Reply
Print Profile
70+ v1
0
Reply
Print Profile
70+ v1
0
Reply
Print Profile
70+ v1
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld