Fidget Star by Little Mac Designs

Little Mac Designs

Toys & Games>Other Toys & Games

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

1 h

1 plate

4.9(55)

0.2mm layer, 3 walls, 10% infill

58 min

1 plate

4.0(3)

Boost

107

429

427

Released

Description

The Fidget Star is a revolutionary sensory tool designed to captivate and calm your senses. Crafted with precision, this palm-sized star-shaped fidget toy combines functionality with a touch of cosmic charm.

Comment & Rating (69)

@Stubkjaer

Print Profile

0.2mm layer, 2 walls, 10% infill

Very nice model

(Edited)

The designer has replied

@moonrakerone

Given you reviews two models with this issue recently - Have you cleaned that bed with some dish soap? Isopropyl and other solvents tend to smear it around, but a degreasing dish soap clears hand oils and plastic residue realllllly well.

@Stubkjaer

that will be my next move 👍

@Boerni

I printed the star scaled to 2 walls (0,66666) without problems.

The designer has replied

@LittleMacDesign

Nice! that looks great!

@moonrakerone

What a good one. Thanks!

The designer has replied

@LittleMacDesign

Thank you! I'm glad you like it! I'll be making similar fidget toys in the future, so definitely check those out when they come!

@Jarco_

Print Profile

0.2mm layer, 2 walls, 10% infill

Printed perfectly no issues what so ever

@Tipicard

Print Profile

0.2mm layer, 2 walls, 10% infill

good !!

@DIYBeyond3D

Print Profile

0.2mm layer, 2 walls, 10% infill

Nice & easy :)

@marius.umbrasas

Print Profile

0.2mm layer, 2 walls, 10% infill

Simple, elegant, sometimes mesmerizing, especially, when I'm in a procrastinating mood...

@Action3DFigure

Print Profile

0.2mm layer, 2 walls, 10% infill

@adamlillo

Print Profile

0.2mm layer, 2 walls, 10% infill

full apart when printing

The designer has replied

@moonrakerone

This pretty much only happens due to a dirty/greasy build plate. If you give it a wash with a bit of dish soap and try again it'll almost certainly work.

(Edited)

@LittleMacDesign

Make sure that your bed is clean, and that your z-offset is correct. if you try and print this file too fast, it will also fail. there is not a lot of surface area for it to stick to the bed with, so fast speeds are not recommended