DIY Drawer with custom labels by Never Disarm

Never Disarm

Tools>Organizers

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

13.2 h

2 plates

4.7(15)

Boost

182

370

431

297

Released

Description

Introducing the ‘DIY Drawer,’This modular organizer boasts two drawers, each equipped with 15 compartments, providing a tailored solution for your storage needs. What sets it apart? Every compartment features a customizable tag slot, allowing you to effortlessly label and rearrange with ease using the BambuLab program.

Printed without the need for supports, assembly is a breeze with just two M3x8 screws and 2 M3 Brass fittings per drawer. Despite the minimal hardware, these drawers are exceptionally robust, ready to handle heavy loads.

**Key Features:**
- No Supports Required
- Customizable Tags for Effortless Organization
- Easy Assembly with Minimal Hardware
- Designed for Heavy-Duty Storage

**Notes:**
- Ideal for PLA; .
- Successfully tested with a 0.4mm Nozzle and 0.2mm Layer Height.

This is more than a drawer; it's a customizable storage experience designed to fit seamlessly into your space. Download now and revolutionize your organization game with the ‘DIY Drawer’

diydrawer

diy

modularstorage

customizableorganizer

Comment & Rating (19)

@Villestrandberg

Print Profile

0.2mm layer, 2 walls, 15% infill

Awesome design and super good product!!

@richard.sikorsk

Print Profile

0.2mm layer, 2 walls, 15% infill

Sehr coole kleine Sortierkasten Schublade.

@Omthetortoise

Boosted

Came out really nice - I did a labeled set of tags and drawer pulls as well. I did change the handle with an M4 through hole, instead of a heat set insert. That way I was able to go through the front with an M4x16, threaded onto a nut. (My hands were too big to manage the original handle positioning.)

@8BitEverything

Boosted

I love this design, printed one last night flawlessly. Question, what's the purpose of the holes on the top and bottom of the shell? It seems like it might be for stacking but there's not enough clearance inside for a screwhead. Thanks again!

@user_518552757

Print Profile

0.2mm layer, 2 walls, 15% infill

not sure how two of these would connect to each other. instructions aren't clear enough.

@Omthetortoise

Boosted

I'm considering printing a plug like a T to keep the front side from shifting and a threaded on on the smaller holes in back, if I can get it to clear the drawers when they are moving

@sullise

Print Profile

0.2mm layer, 2 walls, 15% infill

difficult to attach handles. Inended up gluing the face plate and handle on. But otherwise very nice for organizing my screws and nuts.

(Edited)

@Hrco69

Print Profile

0.2mm layer, 2 walls, 15% infill

perfection thankss

@Harry.S

Print Profile

0.2mm layer, 2 walls, 15% infill

brilliant, works perfectly great model!

@Omthetortoise

Boosted

I love the looks and functionality of this set, and am halfway through creating all the compartment labels which look fantastic. As a sharp contrast, what in satans left nipple is up with the devilish design of the handles. The inner holes are so close to the compartment wall that they are extremely difficult to attach. There isn’t enough clearance to get the M3x8 screw through and the angle for tightening (even using a ball-end hex key) is next to impossible to accomplish. In the end, I decided to heat set some inserts in the faceplate and drawer after glueing them together, and making the heat set recess in the handle a through hole. It actually gives the handle almost an industrial look. It’s also easier if you decide to repurpose the drawers down the line as the handle is big enough to add some text to indicate contents. (reprinting just the handle takes very little time or filament)

(Edited)

@Omthetortoise

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great, although the first drawer I printed had some quality issues at the bottom left corner, where it lifted off the plate. It was still serviceable as the faceplate covers it up and on the inside it is not very noticable