Overhang Test - Bambulab P1 X1 and Other Printers
Copyright Claim
Overhang Test - Bambulab P1 X1 and Other Printers
Boost
34
79
18
Print Profile(2)
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
Designer
22 min
1 plate
FAST 8-MIN / 0.2mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
Boost
34
79
18
1
309
198
Released
Description
A very simple Overhang Test
You can print it with the 2 printing profiles, use the one you prefer.
NORMAL profile: automatic cooling activated, speed reduced to 10-20mm/s
FAST profile: automatic cooling deactivated, speed 150-250mm/s
Or you can choose in the app the option to use your own filament parameters, and your own cooling settings will be applied.
Happy printing!
Comment & Rating (18)
All
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
Xdd realized how good is my p1s
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
really good
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
Model is great, maybe slow down your speed as mine was knocked of the plate right after completing the 50 degree mark. A brim would help too. It was the very first print on this new machine, buildplate was cleaned with dishsoap and alcohol right out of the box 🤷♂️
Bed Adhesion Issue
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
Wie zu erwarten ab 60-80° sind die überhänge deutlich sichtbar danke!
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
Helpüful
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
it's a overhang test that is quick
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
NORMAL 16-MIN / 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld