解决iPhone15pro的无线充电时手机过热的小工具

功能1：新的iPhone15充电时散热不佳，在充电过程中会手机发烫，虽然苹果公司已经升级的手机固件，但是发热问题依然存在，所以几个小配件+3d打印可以很好的解决这个问题。

功能2：有时候手机放在无线充电器上不是想要充电，只是把充电器当支架使用，通过这个工具的开关，可以控制风扇与充电器同时开关。

配件列表
4010风扇2pin x 1
按钮开关两脚 x 1
TYPEC母头带线 x1

特别说明：这个工具由于风扇是5v的风扇，所以不支持快充，如果需要快充要根据不同电压选择不同风扇并且更换快充的TYPEC母头

————————————————————————————————————————————————
A gadget to solve the problem of phone overheating when charging iPhone 15pro wirelessly

Function 1: The new iPhone 15 does not dissipate heat well when charging, and the phone will get hot during the charging process. Although Apple has upgraded the phone firmware, the heating problem still exists, so a few small accessories + 3D printing can solve this problem well. question.

Function 2: Sometimes the mobile phone is placed on the wireless charger not to charge, but to use the charger as a stand. Through the switch of this tool, the fan and charger can be controlled to be switched on and off at the same time.

Accessories list
4010 fan 2pin x 1
Button switch legs x 1
TYPEC female head with cable x1

Special note: This tool does not support fast charging because the fan is a 5V fan. If you need fast charging, you must choose different fans according to different voltages and replace the TYPEC female connector for fast charging.

————————————————————————————————————————————————

开关链接：
https://detail.tmall.com/item.htm?_u=q2h6giif384&id=623264257486

4010风扇5v 2pin
https://item.taobao.com/item.htm?id=640258020964

TYPEC母头
https://item.taobao.com/item.htm?id=696152213598&_u=q2h6giib7a0