JACK ARNOLD: CREATURE FROM THE BLACK LAGOON 1954

Cut-Out-Version of a Promo-Picture showing the Beast and the Beauty.

Profile Two (Sepia):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Orange
At layer #16 (1.36mm) swap to Cream White
At layer #31 (2.56mm) swap to Ivory White for the rest.

Profile One (Black and White):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Cream White
At layer #32 (2.64mm) swap to Ivory White for the rest.