Marias cards that are simplified for printing on a 3D printer.
The "All cards" file is fully set to 3 colors (only two colors can be used). The file has been preset to simplify printing, as the file contains many objects.
The colors in the settings (white, red, and black) are for illustrative purposes only and provide a pause in the print to change the color.
For card printing I recommend "3Dlac", which ensures a very good adhesion of the first layer.
To achieve the texture of the cards, use texture plate.
Test at Prusa MK3S+ with 0,25 mm nozzle without MMU.
Settings
Material: PLA
Nozzle: 0.25 or smaller
First layer: 0.2 mm
Other layers: 0.15 mm (see pictures) or 0.10 mm
Number of cards per sheet (recommended): 8 or less
How to play:
My favorite:
https://en.wikipedia.org/wiki/Mari%C3%A1%C5%A1
Pub game:
https://en.wikipedia.org/wiki/Mari%C3%A1%C5%A1
War:
https://gamesquad.cz/hry-se-sedmovymi-mariasovymi-kartami/#valka
The Seven Card Card Game - War is designed for 2 players. War is a simple card game that even children can play. At the beginning, the cards are shuffled and the deck is divided into two piles between the players. Each player then discards a card. The player who discards the higher card wins the round and takes the discarded cards. He slides these cards to the bottom of the deck. It may be the case that players discard the same symbols. In this case, both players lay out three more cards. The third card decides who wins the round, and the one with the higher value wins. The player who gets all the cards wins the game.
Else:
https://en.wikipedia.org/wiki/Sedma
and more
Mariášové karty, které jsou zjednodušeny pro tisk na 3D tiskárně.
Soubor “All cards” je plně nastaven na 3 barvy (mohou být použity pouze dvě). Soubor byl přednastaven pro zjednodušení tisku, jelikož soubor obsahuje mnoho objektů.
Barvy v nastavení (bílá, červená a černá) slouží jen ilustračně a zajištují pozastavení tisku pro výměnu barvy.
Pro tisk karet doporučuji “3Dlac”, který zajištuje velmi dobrou přilnavost první vrstvy.
Pro dosažení textury karet byl použit tiskový plát “Oboustranný ocelový tiskový plát se zrnitým práškovým PEI povrchem” od Průši.
Karty stačí jen ve Sliceru zobrazit a spolu s čistícím blokem umístit na tiskový plát.
Nastavení