LEGO Lamborghini Sian Wallmount Plexiglass
LEGO Lamborghini Sian Wallmount Plexiglass
Print Profile(1)
Description
This is a wallmount I designed to hang up a LEGO Lamborghini Sian 42115 on the wall.
I was using the Plexiglass pannels I already had at home, in the size of 70cm (height) x 40cm (width) x 5mm (depth). The hole in the Plexiglass to fit the wallmount is 8mm. The location of the hole differs for each car model.
In the wall there was already a dowel for the screw.
I purchased colored adhesive film on Amazon and attached it onto the back of the pannel for a shiny finish. You can also attach the film to the front of the pannel instead, for a matte finish.
You can screw the wallmount directly through the hole in the Plexiglass pannel in the wall. There is also the option to use the wallmount without the Plexiglass pannel. Keep in mind the wallmount was designed including the 5mm depth of the Plexiglass. 
To attach the car to the wallmount, you need two LEGO Technic pins.
THE OTHER HOLES YOU CAN SEE IN THE PANNEL WERE DRILLED FOR ANTOHER PROJECT AND ARE NOT NECESSARY FOR THIS BUILD
Comment & Rating (4)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
