Serrated Cable Clips COLLECTION by BS 3D Print

BS 3D Print

Tools>Organizers

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.28mm layer, 3 walls, 15% infill

Designer

2.3 h

6 plates

4.9(7)

Boost

104

139

140

Released

Description

I love these types of serrated cable ties and every time I placed an order from China, I always ordered a blister until I bought my first printer.

I copied one of them and, in combination with the original model, I have collected several of various sizes and options, including different ways of screwing.

They can be used either screwed or with double-sided adhesive.

Comment & Rating (9)

@jp.potter

Print Profile

0.28mm layer, 3 walls, 15% infill

adhesion failure: part may need a brim. UPDATE: second print came out great. must have been bad plate prep on the first run

(Edited)

The designer has replied

@BS3DPrint

The brim is in automatic mode, with gold textured PEI plate there have never been adhesion problems. I will take your opinion into consideration.

@jp.potter

Replying to @BS3DPrint :

yeah, I don't have the gold textured PEI plate. Might be the difference. I usually don't like to print with a brim either, but was surprised to find this popped off. Could be just bad luck on this print. I can clean and retry. I'll come back to this if the second attempt works.

@andre.b

Print Profile

0.28mm layer, 3 walls, 15% infill

Great design. printed 1 medium and 7 small ones. I’ve removed on all of them the screw holes, which I didn’t need.

@SheepdogForge

Print Profile

0.28mm layer, 3 walls, 15% infill

The design is great, my only issue is bed adhesionso maybe a brim or I just need to put more glue on before hand. It'd also be nice to have a multiple print plate.