Antenna holder for TV antenna, hook for various things
The original intention was to create an antenna holder for a small TV antenna in the garage.
Various things in the garage - workshop can also be hung on the hook. For example, extension cables, clamps, hoses, etc...
The base is pressed together with the hook. It may be necessary to gently grind the hook, or use instant glue.
Be careful when pushing so that the base doesn't crack - if it doesn't, sand the hook a little
The base is installed on 4 screws.
I recommend printing from PETG and filling at least 30%
Slicer recommends turning on supports for the hook. So I turned them on in the profile.
Please share your print
Thanks for the feedback and likes