Articulated Sky Dragon by TsiTsi

TsiTsi

Miniatures>Creatures

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.16mm layer, 3 walls, 25% infill

Designer

4.1 h

1 plate

4.4(155)

0.16mm layer, 3 walls, 25% infill

4.8 h

1 plate

4.5(2)

0.2mm A1mini 100%

3.2 h

1 plate

4.0(2)

Boost

435

689

176

2.2 k

1.5 k

Released

Description

An Articulated Sky Dragon

articulated sky dragon

miniatures articulated

Comment & Rating (176)

@Angelkati86

180% scale, 0.16 layer, 40% infill. My boy love this thing. The original size of 100% was scrap, the legs are broken at the hinges, but in the bigger scale its fine.

@dzyne91

Print Profile

0.16mm layer, 3 walls, 25% infill

Legs need more thickness in order to be durable and functional. they broke off with little effort.

@LVSPARK

Great Model. Thanks

@flatopossum

Print Profile

0.2mm A1mini 100%

great print

@ptusler93

Print Profile

0.16mm layer, 3 walls, 25% infill

This printed very well. It does not scale down, though. The connectors become too fragile.

@user_338235382

Print Profile

0.16mm layer, 3 walls, 25% infill

PRINTED VERY NICE!

@ptusler93

At 100%, this is too fragile. I printed this on my Bambu X1C with the included profile in Sunlu Rainbow Silk PLA, 235 degrees. At 100% scale and silent mode, the front legs pretty much fell off, and the tail section had several segments fused. They broke off when I attempted to separate them. At 150% standard speed, it seems to work fine. There were still some tail sections fused, but I was able to separate them without damage. I might try 100% again at standard speed, but I can't imagine that would improve it. Otherwise, a good model!

(Edited)

@user_2487772254

Print Profile

0.16mm layer, 3 walls, 25% infill

very nice print and cool details. was great how it was ready to use off the build plate. PLA+

@mark.j.richards

Print Profile

0.16mm layer, 3 walls, 25% infill

To print this in Eryone silk PLA I needed to increase layer height and slow it down to 10mm/s for the first layer to get all sections to stick as the print got higher.

@genii2811

Print Profile

0.16mm layer, 3 walls, 25% infill

Orange dragon for the year of the dragon Perfect print

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.