Activated Carbon Filter for Bambu Lab X1 Carbon 3D Printer
Copyright Claim
Activated Carbon Filter for Bambu Lab X1 Carbon 3D Printer
Boost
90
240
42
Print Profile(1)
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
1.7 h
1 plate
Boost
90
240
42
0
332
154
Released
Description
This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9), and you are ready for another 60 days of printing. As shown in the video below, please make sure you add some tape to the lid to remove the box easily. I recommend printing this in PETG, ASA, or ABS, as the heat might be too high for PLA. You don't need any support.
Disclaimer: I'm letting you know you are using this model at your own risk. Links may be affiliate links.
Comment & Rating (42)
All
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
Printed well. I'll replace the original filter with this one soon. Thanks for sharing!
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
Szuper! Nagyon tetszik! 5*
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
Printed well with PETG, much cleaner design for the grates.
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
Perfect print!
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
Box came out perfect.
1
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
works great and a little bit of tape makes a good handle for taking it out!
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
good
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
came out great
0
Reply
Came out great in asa
0
Reply
Print Profile
Standard print 1 case and lid, 0.2mm layer, 2 walls, 15% infill
Printed it in PC - came out great. Thanks
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld